AUSTRALIAN MONITOR AMD2200P Spezifikationen

INSTALLATION AND OPERATION MANUALPOWER AMPLIFIER AMD2200PAMD SERIES

482.00 mm (19.0”)465.00 mm (18.3”)32.00 mm(1.25”)44.00 mm(1.75”)430.00 mm (16.9”)438.00 mm (17.25”)PAGE 10AMD2200P INSTALLATION AND OPERATION MANUALDI

Specification ConditionsFrequency Response 70 Hz - 18 kHz, -3 dB Signal Input 2 dB below clipTotal Harmonic Distortion < 0.6 % Signal input 2

ENGINEERED BY AUSTRALIAN MONITOR Address: 1 Clyde Street, Silverwater, Sydney NSW 2128 Australia. Private Bag 149, Silverwater NSW 1811 ABN 78 001 34

1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6.

The AMD P series of power amplifiers from Australian Monitor represent a quantum leap forward in connectivity, controllability & flexibility in the

1 Signal IndicatorThe signal indicator will go blue when audio is present on that channel of the amplifier.2 Fault Indicator The fault indicator wil

1 230 to 240V or 115V to 120VThe power input is NOT auto-switching. Australian Monitor should be contacted if the voltage needs to be changed from it

UnpackingEvery Australian Monitor product is tested and inspected before leaving our factory and should arrive in perfect condition.When opening the c

Port & Protocol Information The RS232 port of the AMD2200P amplifier’s consists of three connections:Transmit – Data from the amplifierReceive – Dat

Channel Output Level:To adjust the volume control of an output channel. %PLVL:xyy<CR>In this command x represents the output channel to select

Description Command Response NotesGet input cross-mix level %PCML:xy??<CR> %PCML=xyzz<CR> x ranges from 01 to 04 y ranges from 0